name: cleartrade-phox-rec
type: drupal11
docroot: web
php_version: "8.4"
webserver_type: nginx-fpm
xdebug_enabled: false
additional_hostnames: []
additional_fqdns: []
database:
    type: mysql
    version: "8.0"
use_dns_when_possible: true
composer_version: "2"
web_environment: []
corepack_enable: false

# Key features of DDEV's config.yaml:

# name: <projectname> # Name of the project, automatically provides
#   http://projectname.ddev.site and https://projectname.ddev.site
# If the name is omitted, the project will take the name of the enclosing directory,
# which is useful if you want to have a copy of the project side by side with this one.

# type: <projecttype>  # asterios, backdrop, cakephp, codeigniter, craftcms, drupal, drupal6, drupal7, drupal8, drupal9, drupal10, drupal11, drupal12, generic, joomla, laravel, magento, magento2, php, shopware6, silverstripe, symfony, typo3, wordpress, wp-bedrock
# See https://docs.ddev.com/en/stable/users/quickstart/ for more
# information on the different project types

# docroot: <relative_path> # Relative path to the directory containing index.php.

# php_version: "8.4"  # PHP version to use, "5.6" through "8.5"

# You can explicitly specify the webimage but this
# is not recommended, as the images are often closely tied to DDEV's' behavior,
# so this can break upgrades.

# webimage: <docker_image>
# It’s unusual to change this option, and we don’t recommend it without Docker experience and a good reason.
# Typically, this means additions to the existing web image using a .ddev/web-build/Dockerfile.*

# database:
#   type: <dbtype> # mysql, mariadb, postgres
#   version: <version> # database version, like "10.11" or "8.0"
#   MariaDB versions can be 5.5-10.8, 10.11, 11.4, 11.8
#   MySQL versions can be 5.5-8.0, 8.4
#   PostgreSQL versions can be 9-18

# router_http_port: <port>  # Port to be used for http (defaults to global configuration, usually 80)
# router_https_port: <port> # Port for https (defaults to global configuration, usually 443)

# xdebug_enabled: false  # Set to true to enable Xdebug and "ddev start" or "ddev restart"
# Note that for most people the commands
# "ddev xdebug" to enable Xdebug and "ddev xdebug off" to disable it work better,
# as leaving Xdebug enabled all the time is a big performance hit.

# xhgui_http_port: "8143"
# xhgui_https_port: "8142"
# The XHGui ports can be changed from the default 8143 and 8142
# Very rarely used

# host_xhgui_port: "8142"
# Can be used to change the host binding port of the XHGui
# application. Rarely used; only when port conflict and
# bind_all_ports is used (normally with router disabled)

# xhprof_mode: [prepend|xhgui|global]
# Default is "xhgui"

# webserver_type: nginx-fpm, apache-fpm, generic

# timezone: Europe/Berlin
# If timezone is unset, DDEV will attempt to derive it from the host system timezone
# using the $TZ environment variable or the /etc/localtime symlink.
# This is the timezone used in the containers and by PHP;
# it can be set to any valid timezone,
# see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
# For example Europe/Dublin or MST7MDT

# composer_root: <relative_path>
# Relative path to the Composer root directory from the project root. This is
# the directory which contains the composer.json and where all Composer related
# commands are executed.

# composer_version: "2"
# You can set it to "" or "2" (default) for Composer v2
# to use the latest major version available at the time your container is built.
# It is also possible to use each other Composer version channel. This includes:
#   - 2.2 (latest Composer LTS version)
#   - stable
#   - preview
#   - snapshot
# Alternatively, an explicit Composer version may be specified, for example "2.2.18".
# To reinstall Composer after the image was built, run "ddev utility rebuild".

# nodejs_version: "24"
# change from the default system Node.js version to any other version.
# See https://docs.ddev.com/en/stable/users/configuration/config/#nodejs_version for more information
# and https://www.npmjs.com/package/n#specifying-nodejs-versions for the full documentation.

# corepack_enable: false
# Change to 'true' to 'corepack enable' and gain access to latest versions of yarn/pnpm

# additional_hostnames:
#  - somename
#  - someothername
# would provide http and https URLs for "somename.ddev.site"
# and "someothername.ddev.site".

# additional_fqdns:
#  - example.com
#  - sub1.example.com
# would provide http and https URLs for "example.com" and "sub1.example.com"
# Please take care with this because it can cause great confusion.

# upload_dirs: "custom/upload/dir"
#
# upload_dirs:
#   - custom/upload/dir
#   - ../private
#
# would set the destination paths for ddev import-files to <docroot>/custom/upload/dir
# When Mutagen is enabled this path is bind-mounted so that all the files
# in the upload_dirs don't have to be synced into Mutagen.

# disable_upload_dirs_warning: false
# If true, turns off the normal warning that says
# "You have Mutagen enabled and your 'php' project type doesn't have upload_dirs set"

# ddev_version_constraint: ""
# Example:
# ddev_version_constraint: ">= 1.24.8"
# This will enforce that the running ddev version is within this constraint.
# See https://github.com/Masterminds/semver#checking-version-constraints for
# supported constraint formats

# working_dir:
#   web: /var/www/html
#   db: /home
# would set the default working directory for the web and db services.
# These values specify the destination directory for ddev ssh and the
# directory in which commands passed into ddev exec are run.

# omit_containers: [db, ddev-ssh-agent]
# Currently only these containers are supported. Some containers can also be
# omitted globally in the ~/.ddev/global_config.yaml. Note that if you omit
# the "db" container, several standard features of DDEV that access the
# database container will be unusable. In the global configuration it is also
# possible to omit ddev-router, but not here.

# performance_mode: "global"
# DDEV offers performance optimization strategies to improve the filesystem
# performance depending on your host system. Should be configured globally.
#
# If set, will override the global config. Possible values are:
#   - "global":  uses the value from the global config.
#   - "none":    disables performance optimization for this project.
#   - "mutagen": enables Mutagen for this project.
#
# See https://docs.ddev.com/en/stable/users/install/performance/#mutagen

# fail_on_hook_fail: False
# Decide whether 'ddev start' should be interrupted by a failing hook

# host_https_port: "59002"
# The host port binding for https can be explicitly specified. It is
# dynamic unless otherwise specified.
# This is not used by most people, most people use the *router* instead
# of the localhost port.

# host_webserver_port: "59001"
# The host port binding for the ddev-webserver can be explicitly specified. It is
# dynamic unless otherwise specified.
# This is not used by most people, most people use the *router* instead
# of the localhost port.

# host_db_port: "59002"
# The host port binding for the ddev-dbserver can be explicitly specified. It is dynamic
# unless explicitly specified.

# mailpit_http_port: "8025"
# mailpit_https_port: "8026"
# The Mailpit ports can be changed from the default 8025 and 8026

# host_mailpit_port: "8025"
# The mailpit port is not normally bound on the host at all, instead being routed
# through ddev-router, but it can be bound directly to localhost if specified here.

# webimage_extra_packages: ['php${DDEV_PHP_VERSION}-tidy', 'php${DDEV_PHP_VERSION}-yac']
# Extra Debian packages that are needed in the webimage can be added here

# dbimage_extra_packages: [netcat, telnet, sudo]
# Extra Debian packages that are needed in the dbimage can be added here

# use_dns_when_possible: true
# If the host has internet access and the domain configured can
# successfully be looked up, DNS will be used for hostname resolution
# instead of editing /etc/hosts
# Defaults to true

# project_tld: ddev.site
# The top-level domain used for project URLs
# The default "ddev.site" allows DNS lookup via a wildcard

# share_default_provider: ngrok
# The default share provider to use for "ddev share"
# Defaults to global configuration, usually "ngrok"
# Can be "ngrok" or "cloudflared" or the name of a custom provider from .ddev/share-providers/

# share_provider_args: --basic-auth username:pass1234
# Provide extra flags to the share provider script
# See https://docs.ddev.com/en/stable/users/configuration/config/#share_provider_args

# disable_settings_management: false
# If true, DDEV will not create CMS-specific settings files like
# Drupal's settings.php/settings.ddev.php or TYPO3's additional.php
# In this case the user must provide all such settings.

# You can inject environment variables into the web container with:
# web_environment:
#     - SOMEENV=somevalue
#     - SOMEOTHERENV=someothervalue

# no_project_mount: false
# (Experimental) If true, DDEV will not mount the project into the web container;
# the user is responsible for mounting it manually or via a script.
# This is to enable experimentation with alternate file mounting strategies.
# For advanced users only!

# bind_all_interfaces: false
# If true, host ports will be bound on all network interfaces,
# not the localhost interface only. This means that ports
# will be available on the local network if the host firewall
# allows it.

# default_container_timeout: 120
# The default time that DDEV waits for all containers to become ready can be increased from
# the default 120. This helps in importing huge databases, for example.

#web_extra_exposed_ports:
#- name: nodejs
#  container_port: 3000
#  http_port: 2999
#  https_port: 3000
#- name: something
#  container_port: 4000
#  https_port: 4000
#  http_port: 3999
# Allows a set of extra ports to be exposed via ddev-router
# Fill in all three fields even if you don’t intend to use the https_port!
# If you don’t add https_port, then it defaults to 0 and ddev-router will fail to start.
#
# The port behavior on the ddev-webserver must be arranged separately, for example
# using web_extra_daemons.
# For example, with a web app on port 3000 inside the container, this config would
# expose that web app on https://<project>.ddev.site:9999 and http://<project>.ddev.site:9998
# web_extra_exposed_ports:
#  - name: myapp
#    container_port: 3000
#    http_port: 9998
#    https_port: 9999

#web_extra_daemons:
#- name: "http-1"
#  command: "/var/www/html/node_modules/.bin/http-server -p 3000"
#  directory: /var/www/html
#- name: "http-2"
#  command: "/var/www/html/node_modules/.bin/http-server /var/www/html/sub -p 3000"
#  directory: /var/www/html

# override_config: false
# By default, config.*.yaml files are *merged* into the configuration
# But this means that some things can't be overridden
# For example, if you have 'use_dns_when_possible: true'' you can't override it with a merge
# and you can't erase existing hooks or all environment variables.
# However, with "override_config: true" in a particular config.*.yaml file,
# 'use_dns_when_possible: false' can override the existing values, and
# hooks:
#   post-start: []
# or
# web_environment: []
# or
# additional_hostnames: []
# can have their intended affect. 'override_config' affects only behavior of the
# config.*.yaml file it exists in.

# Many DDEV commands can be extended to run tasks before or after the
# DDEV command is executed, for example "post-start", "post-import-db",
# "pre-composer", "post-composer"
# See https://docs.ddev.com/en/stable/users/extend/custom-commands/ for more
# information on the commands that can be extended and the tasks you can define
# for them. Example:
#hooks:
# post-import-db:
#   - exec: drush sql:sanitize
#   - exec: drush updatedb
#   - exec: drush cache:rebuild
